Managing Fire Hazards on Site
Building environments, especially those in a transitional phase, present specific fire hazards due to frequent layout changes, relocatable equipment, and divided workforces. A reliable alerting system is necessary for notifying workers without delay. The Howler range, including the radio-based GOLink system, HO units, and site alert models, provides a tailored safety setup to match various site demands.
A Look at HO Alarms
HO alarms are independent, battery-operated units used where hard-wired installations are not viable. Ideal for moveable cabins or outbuildings, they function autonomously.
- Loud alarm: Around 102 dB at a metre’s distance.
- Visual signal option: Some models include integrated lights for visibility.
- IP-rated: Many are suited for outdoor use or partially exposed areas.
These alarms offer additional coverage where the core alert network may not reach.
The Site-Wide Alert Range
Suitable for compact projects, the Site Alert system can work as standalone or in groups of up to 20 units using a simple two-core cable. When set off, all devices in the network respond simultaneously.
- Approx. 100 dB sound level at 1 metre
- Built-in visual LED for loud or noisy settings
- Recommended where cabling is straightforward
Going Wireless: Site Alert RF
Where cable routes aren't possible, Site Alert RF links up to 30 units over wireless. It has an open-area range of around 1 km and supports multiple frequencies for interference avoidance.
Blending wireless and cabled systems is commonly the best choice for howler site alert systems sites with varying structures.
Integrating the GOLink System
The GOLink system acts as a coordinating hub for large, multi-zone installations, using wireless signals to connect multiple devices.
GOLink Interface Connections
Through the Interface Unit, it’s possible to tie into turnstiles, autodiallers, CCTV, and other site safety components. Up to 127 points can interact across a site-wide network.
Dual-Function Features
Certain models (e.g. H05 GOLink) include a first aid button alongside the fire alert. The first aid function quietly sends a location-specific assistance request, allowing medical needs to be flagged without general evacuation.
How to Deploy Effectively
- Zone assessment: Identify where alarms need to be noticeable, dividing the site into manageable sectors.
- Choose connection types wisely: Use hard-wired alarms where feasible, supplementing with RF in distant or pop-up areas.
- Set a maintenance routine: Schedule regular testing and check battery levels.
- Training & signage: Ensure directions are posted and team members know how to respond to alerts.
FAQs
- How many devices can be wired together?
- Up to 20 Site Alert units can be connected using 2-core cable.
- What’s the wireless range of Site Alert RF?
- Approx. 1 km in open-air conditions, though physical obstructions can reduce range.
- HO panel required?
- No, HO models are self-sufficient and do not require central control.
- Can GOLink interface with other site systems?
- Yes, external systems can be connected via the GOLink Interface Unit.
- Purpose of switch protection?
- It reduces false alarms by sounding a warning if tampered with before activation.
- Can both cabled and RF alarms work together?
- Yes, the GOLink system allows wired and wireless units to operate on the same network.
- Does first aid signal cause evacuation?
- No. It sends a targeted alert to designated receivers without activating evacuation systems—unless configured otherwise.
Wrap-up
Whether your project involves one zone or several, Howler alarms—HO, GOLink, howler site alarms and Site Alert—offer solutions that adjust to varying conditions. For product information, planning tools or live demos, visit the Howler section on FireSense.